煮刃的工作手電筒 與 JETBeam 家族

hung3510012

原帖由 xysword 于 2009-2-20 13:38 发表

                               
登录/注册后可看大图

介绍一下  MJP  Extrtmt  III  ,没找到相关资料呢

報告 :  

http://www.candlepowerforums.com/vb/showthread.php?t=185395

LED : Rebel LED bin number NW0D/NX0D or better.
Input voltage : 0.9V - 5.0V (AAA/10440)
AAA battery chemistry : Alkaline(1.5V), NIMH(1.2V), NICD(1.2), Primary Lithium(1.7V) & rechargeable Li-Ion 10440(4.2V)
Uses PWM at high frequency 7800Hz. No flickering from 0.2% to 100% output
AR Coated glass lens (Diameter 12mm, thickness 1mm)
HA III natural finish, no mis-match.
Single o ring seal at lens, LED module & battery tube.
3 positions twisting action for on/off and programming : off, P1, P2
Tighten for off. Reduce the chances of losing the complete head (bezel & LED module)
Lock out mode : loosen 2 turns
Stable tail stand even with small keyring, similar to the KIB flashlight.
Area lighting with white diffuser installed
water resistant

Size:
Length : 77mm
Diameter : 14mm (bezel)

10X

來瞧瞧(:20:)