TA的每日心情 | 开心
2015-8-21 14:35 |
|---|
签到天数: 169 天 [LV.7]常住居民III
|
本帖最后由 ACEBEAM官方 于 2014-9-7 10:29 编辑
编辑模式太蛋疼，，图片弄不上，，还请各位移步百度手电吧，不好意思 http://tieba.baidu.com/p/3278864953?pn=1
首先是开箱！
X60M手电，说明书，保修卡，尾按胶冒，防水o圈，车充接头，USB充电线，充电器，背带，购买的原厂20A放电的动力电池
这六颗电池是acebeam改名之前的，我急着要，所以就不管这些啦，第二批应该就是acebeam的logo了，电芯不变,是LG HE2 20A放电 2500mAh，和拆机的比克对比一下
电池架外形和X60的一样，不过做工升级了，为了降低内阻，负极弹簧使用了紫铜材质，再在外面镀金
新增了个警告标示，意思就是必须用相同品牌，性能，电压，批次的电池，
装上电池~普通的18650电池只能让X60M达到8000lm，而要达到10000lm必须使用动力电池
纯铜电路仓，外加镀金，这个和led的基板相连，散热效果很不错，一体仓，由于使用了纯铜电路仓，X60M的头部相比X60重了许
X60M依然采用磁环无极调光，分别有30lm档，200lm~10000lm档，爆闪档
把电池架装入筒身~
X60M的外形和X60差不多，只是配色有变化，相比X60，X60M的头部和磁环氧化成了黑色，电路仓使用纯铜材质并镀金。整体感觉依旧很帅气！
X60M使用3颗cree MT-G2 q0，最高亮度10000lm。很恐怖的数据，在未拿到实物前一直以为X60M是泛光筒，今天拿到手以后发现X60M使用的是一体深光杯，那么X60M应该是为尽量做到远射并且具备超高亮度而设计的
非常干净的铝制光杯，由于爪机实在拙计，，镀膜镜片的效果没拍出来，，
三颗大黄豆~cree MT-G2中光效最高的q0
X60M相比X60在头部的背带卡环槽处做了改进，增加了一个凹槽，以便卡环能够顺利卡入环槽，避免在卡入卡环的过程中损伤其表面的氧化层
比比大小系列~supbeam L10，劲朗X2，ACEBEAM X60M
厂家数据，我英语拙计，，就不翻译了，，
LED: Utilizes a U.S. made top binned 3*CREE MT-G2 q0LED chip (5000K)
Power by 6*IMR18650;
Maximum Brightness : 1,0000 lumens;
Output(select by magnetic ring):
Level 1: 10lms(150hrs),
Infinite brightness mode: 200lms-10000lms, ;
Strobe: 10000lms(1.5hrs),
Working voltage: 18V to 26V;
Max beam distance: 525 meters;
Peak beam intensity: 69000cd;
Impact resistant: 1.2 meters;
Waterproof to IPX6 standard;
Size(mm):276(length)x108(head diameter)x49(tube diameter);
Weight: 850g without batteries;
Altrua durable Aluminum Alloy 6063;
Premium type III hard anodized and anti-abrasive finish;
Ultra-clear tempered glass lens with anti-reflective coating, which achieves a 98.3% light transmittance;
Strobe mode for tactical and emergency use;
High-polish aluminum alloy reflector;
Highly focused beam for maximum distance;
Streamlined body design;
Mechanical reversed polarity protection design for battery carrier;
Intelligent highly efficient circuit board design for max performance and long run time;
Accessories include:
1x user manual;
1x lanyard;
1x warranty card;
1x USB charging cord;
1x car charger (including USB interface);
1x Replacement O - ring and Tailcapgummi;
1x AC/DC adapter (including USB interface);
Produce Description:
For rechargeable lithium battery, there are inevitable differences in the production process, which determince charge a single lithium battery each time is safest way.
For most direct charging flashlights in the market, the batteries are charged in series with a constant voltage of 12.6V, if any one of the three battery break down, the 12.6V constant voltage will be diverted to the remaining tws one, which may caused explosion due to overhearing.
Acebeam X60M flashlight have figured out a safe charging solurion for direct charging flashlight with innovative design on the circuit, which solve the potential safety problem of traditiona direct charging flashlight.
On the basis of not charging the structure of the battery carrier to supply power in series, through internal intelligent electronic switches, the flashlight can automativally convert the serial circuit into parallel charging state when a charging process is detected, there batteries will be charged in parallet at constant voltage 4.2V(accuracy of 1%), and single battery at 0.5A constant current.
Acebeam X60M have the overheat automatic adjustment function, when is detects that and of the batteries is faulty, it will automatically stop charging the faulty battery.
In the structure, Acebeam X60 use a unique suction magnetic charging interface, which will disconnect automativally under externam force to ensure safety.
Acebeam X60M stays on the cutting edge of technology with the latest Cree MT-G2 LED combined with a safe and very convenient contact-charging method achieved by automatic magetice force.
Regarding Charging:
Input : 5V DC Output : 4.2V DC/500MA *6 MAX;
Charging time: depend on the capacity of the batteries, Charging time = battery capacity/500mA + 0.5 hour;
Regarding Storage:
If you do not use the flashlight for a long time , please take out the batteries from the flashlight, in order to avoid batteries leak and damage the flashlight.
If you store the rechargeable batteries for a long time, we suggest you conduct a charging-discharging operation every threr month, so as to extend the lifetime of batteries.
Please do not use metal objects to contact the positive and negative electrode of the USB charging line to avoid short circuit and damage the charging device.
|
|
IP卡
狗仔卡
发表于 2014-9-6 21:17
置顶卡
喧嚣卡
变色卡
显身卡
楼主
