TA的每日心情 | 郁闷 2024-11-22 07:46 |
---|
签到天数: 4692 天 [LV.Master]伴坛终老
|
- Cree XP-L2 EasyWhite LED
- Nominal CCT 4000K
- Typical CRI: 93-95
- Tint deviation: 2-step MacAdam ellipse
- User Selectable Levels: 3 main levels (High, Medium and Low). Each main level can be programmed to one of its two sub-levels. The second sub-level of the each main levels can be further programmed to different brightness levels.
- Light Output (runtimes)
- High: H1 285 Lm ( hr) or H2 238 Lm ( hr) / 171 Lm ( hrs) / 106 Lm ( hrs)
- Medium: M1 56 Lm ( hrs) or M2 26 Lm ( hrs) / 10.3 Lm ( hrs) / 3.5 Lm ( hrs)
- Low: L1 1.0 Lm ( days) or L2 0.26 Lm ( days) / 0.06 Lm ( days) / 0.01 Lm ( months)
- Beacon Strobe Mode: 0.2Hz Beacon at Low / 0.2Hz Beacon at H1 / 4Hz Strobe at H1 / 19Hz Strobe at H1
- Light output are ANSI out the front (OTF) values. Runtimes tested (and parasitic drain estimated) using Panasonic Eneloop Pro AA batteries. Remaining battery power, about 10-20%, after step-down are not counted towards the runtimes.
- Operating Voltage Range: 0.7V - 2.0V
- Battery: One AA size NiMH, lithium or alkaline battery. Panasonic Eneloop or Eneloop Pro is highly recommended. Batteries are not included in the box.
- Parasitic Drain: Negligible (much less than the self discharging of a battery)
- Beam Type
- 80 degree spill
- 10 degree hot spot
- Dimensions
- Head Diameter: 0.86 inch (21.8 mm)
- Length: 2.9 inch
- Weight
|
|