论坛 › 灌水·心情(mood) › 祝大家圣诞元旦双节快乐 节日任务上线

moontree 发表于 2013-12-31 00:53

元旦快乐！

奇妙人 发表于 2013-12-31 00:53

奇妙人 发表于 2013-12-31 00:57

bypbyh 发表于 2013-12-31 00:59

今年最后一天,报到。

dzyj001 发表于 2013-12-31 01:13

大家节日快乐

镉优 发表于 2013-12-31 01:19

任务任务

lyd623 发表于 2013-12-31 01:20

新年快乐

DMC3 发表于 2013-12-31 01:24

大家新年快乐！

黑石头1981 发表于 2013-12-31 01:38

顶顶顶顶顶顶顶顶顶顶顶顶顶顶

wolfml1234 发表于 2013-12-31 01:49

元旦快乐！

fresho2 发表于 2013-12-31 01:49

新年快乐

3797 发表于 2013-12-31 02:01

大家节日快乐

lynzxp 发表于 2013-12-31 02:04

元旦快乐！

雄关漫道 发表于 2013-12-31 02:04

祝大家双节快乐

ucige 发表于 2013-12-31 02:06

There may be a time when your remote does not power on, boots to a ‘white only’ screen or is having trouble
starting up. This issue is one of the most common posts on the Logitech Forum and it can happen with a brand
new remote or one that has been used for a long, long time without issue. Sometimes it occurs after a battery
has been removed or power has been lost to the charging cradle. If your remote does not power on, or seems
to have trouble booting, follow these steps closely to get things working again!
• First, please ensure that you have placed your Harmony remote in its charging cradle for at least 3 hours
and that the battery is charged. Even if the remote is not powering on or booting-up correctly, it should still
be charging the battery. A well-charged battery is critical for the next step.
• Remove the remote from the charging cradle after you have charged the battery as above.
• Remove the battery from the remote and wait at least one minute. During this time, you should do the
following:
• Connect the Logitech USB cable to the computer (not the remote). If possible, do not use a USB hub. Use
one of the USB ports on your computer. Also, disable any virus software or firewalls temporarily.
• Launch the Harmony remote software and log into your account.
• Click on the Downloads button at the top-right corner of your screen.
• STOP!
• Now, go back to the remote and press down firmly on the Off button at the top of the remote and hold the
button down as you insert the battery back into the remote. Continue holding down the button for as
long as 30 seconds or until the Logitech splash screen appears on the LCD with the words “Safe
Mode”. Note that remotes that are having trouble with blank or ‘white only’ LCD displays may not show
this message, but if the remote is going to go into Safe Mode at all, it will do so within 30 seconds. Release
the Off button.
Once in Safe Mode, connect the USB cable to the remote. Click on the Firmware button on the Downloads
screen and follow the instructions. The firmware update should begin. Progress of the firmware update can be
seen by watching the status bar on your computer.
Once the firmware upgrade is complete, you may see “Upgrade Successful” on the remote’s screen. Even if
no message is displayed and the screen is dark or all white, continue with the next step. On your computer, the software will bring you to another screen and ask you to update your remote’s setting. Follow the
instructions to update your remote with your Activities & Device profile. Watch the status of the update. Once
completed, unplug the USB cable. If the remote seems to be responsive and the display appears normal, test
the remote. If the screen is still dark or all white, remove the battery, wait about 30 seconds and re-insert the
battery. If the screen returns to normal, test the remote. If not, there may be other issues that a firmware update cannot address. Please feel free to contact me if you have any questions or need assistance.

zx426 发表于 2013-12-31 02:12

元旦快乐！

meisennai 发表于 2013-12-31 02:23

元旦快乐

zuiaishoudianto 发表于 2013-12-31 02:23

预祝大家元旦快乐

are 发表于 2013-12-31 02:39

节日快乐！{:1_292:}

WEIJIANG 发表于 2013-12-31 03:21

祝大家圣诞元旦双节快乐

查看完整版本: 祝大家圣诞元旦双节快乐 节日任务上线