这个设计很漂亮啊，想买一个。国内有卖的么？
真是【重】量級的『詐彈』小巧可愛
Kn 兄要是能带团的话 兄弟先订一只
有团请PM谢谢
两个字:漂亮
呵呵，各位想要的还是在等等吧，等有信了，俺在回复，呵呵
一台液晶显示器多少米
一台全自动洗衣机多少米
这么个玩意1千5真是抢钱，钛有啥贵的，看看价格一斤才折合多少钱。
就一点加工费而已。
赶快仿造个。150 到200还差不多 ...
matmat 发表于 2009-9-10 13:53 http://www.shoudian.org/images/common/back.gif
这玩意不是这么计算的。
要不老兄你仿一个？要的一定多，卖300都成，铝或不锈钢的都行
呵呵，各位想要的还是在等等吧，等有信了，俺在回复，呵呵
kn 发表于 2009-9-10 14:01 http://www.shoudian.org/images/common/back.gif
静候佳音再顶{:1_270:}
不知道我有多爱它!
两个字漂亮
三个字真漂亮
这不是北斗的碳化硼工艺吗?
关于热处理的说明：
J2 is using Ti Grade 5(Ti-6Al-4V)
The technology used in J2 Heat Treated model is being applied for
the special parts in Air craft carrier or airplane,
which needs extremely high durability and wear resistance.
It seldom leaves scratch even with glass.
By heating the Titanium material in high temperature twice,
the substance gets highest hardness at HRC 48 and
the surface hardness gets equivalent level to ceramic(70s).
One thing we must stress is that we do this heat treatment
after diamond blasting to give an even heat treatment effect.
At hence, the surface gets a structure like picture below.
picture is taken x50, Zeiss stereoscopic microscope
If you scrub with soft material like a door key,
you will observe a line looks like a scratch above.
Actually this line is not a scratch,
but a continuation of debris off the metal key left in the
very minute surface structure of heat treated titanium.
In such case, we recommend to polish the light with a Metal Glow.
That is it.
好一个万恶的跳蛋~不不，是**……
这个......警察看见要没收的
还真像炸彈。。。{:1_246:}
这个手电，心血之作，细节精巧
不错，PM价格跟地址
毒倒了
{:1_217:}300做铝合金的还有可能
造型确实另类如果是概念产品和量版型号 1500左右还是可以接受的
如果是量产的消费级产品 把1抹掉改成铝合金的兴许能接受